Anchor Post® and Storm
Anchor® Base Unit
 |
Tube: 2.875" dia x 25" height |
|
Base plate: 5" x 5" x 5/16",
3/4 hole diameter |
|
For use with Anchor Post and
Storm Anchor systems |
|
 |
| |
part# APSA-BASE |
| |
|
Anchor Post and Storm AnchorAdjustment
Tube
|
Tube: 2.5" dia x 27 1/2"
height |
|
Base plate: 5" x 5" x 5/16",
3/4 hole diameter |
|
(9) 3/16" adjustement holes opposed
90° every 3" |
|
For use with Anchor Post and
Storm Anchor systems |
|
 |
| |
part# APSA-SLEEVE |
| |
|
Anchor Post and Storm Anchor
Bottom Brace
|
Attaches to bottom of base units |
|
For use with Anchor Post and
Storm Anchor systems |
|
 |
| |
part# APSA-B-BRACE |
| |
|
Anchor Post Cap Plate
|
Screws into top of a adjustment tube |
|
3" adjustment for accurate levelness |
|
Use a saddle plate on both outer sides
and bolt and nail to beams in wood structure |
|
For use with Anchor Post systems |
|
 |
| |
part# AP-CAP |
| |
|
Anchor Post Adjustable
Saddle Pllate
|
Adjustable from 4 1/2" to 7 1/2"
wide |
|
Drill and bolt through wood frame
in large bolt holes |
|
Nail from bottom and sides to wood
frame through small nailing holes |
|
For use with Anchor Post systems |
|
 |
| |
part# AP-SADDLE |
